Whirlpool model match
Water filter replacement for Whirlpool WRF736SDA models
This consolidated guide covers WRF736SDAB, WRF736SDAM, WRF736SDAW. Our researched filter match for every model listed is everydrop® Filter 4, manufacturer part EDR4RXD1.
Compatibility entry updated October 18, 2026
Guide match: EDR4RXD1Our directory associates each covered model label with everydrop® Filter 4. Confirm the complete label and current manufacturer result before ordering.
Which water filter fits Whirlpool WRF736SDA models?
Our compatibility guide associates WRF736SDAB, WRF736SDAM, WRF736SDAW with everydrop® Filter 4, part EDR4RXD1. These exact labels share one researched filter answer, so they are kept together instead of repeating the same guidance across separate pages.
Whirlpool refrigerators can use several physically different everydrop cartridges. Similar refrigerator styling does not identify the filter, so use the complete model number and current manufacturer guidance to confirm compatibility. Do not choose a cartridge based only on refrigerator color, door arrangement, or product photography.
Exact model numbers covered by this guide
This page covers the complete labels below. Each one is matched with everydrop® Filter 4, part EDR4RXD1, in our current directory.
- WRF736SDAB
- WRF736SDAM
- WRF736SDAW
A shared water-filter match does not mean every appliance component is interchangeable. Use the full label when looking up manuals, parts, or service information.
What is specific to this model family?
Whirlpool lists WRF736SDAB, WRF736SDAM, and WRF736SDAW as the black, monochromatic stainless, and white finishes of the same 25-cubic-foot French-door refrigerator family. The family includes an exterior ice and water dispenser with EveryDrop filtration and uses the Filter 4 replacement path. Keep the complete finish suffix for appliance parts and service.
Check the official source: Whirlpool WRF736SDA catalog information →Research record for WRF736SDA models
This entry keeps WRF736SDAB, WRF736SDAM, WRF736SDAW together because our researched directory assigns the same everydrop® Filter 4 filter, part EDR4RXD1, to every label shown. It was last reviewed using official Whirlpool compatibility information on October 18, 2026. Manufacturer confirmation is still required before ordering.
See how every match is researched →Confirm the model before purchasing
Open the refrigerator and locate the permanent model-and-serial label, commonly found on a side wall, ceiling, door frame, or behind a crisper drawer. Confirm that the complete label matches one of the covered models: WRF736SDAB, WRF736SDAM, WRF736SDAW.
- Use the appliance model—not the serial number.
- Compare EDR4RXD1 with the number on the installed cartridge.
- Open the official Whirlpool confirmation link before ordering.
- Stop if the old and new filter connections do not match.
How often should it be replaced?
The listed replacement interval for everydrop® Filter 4 is every 6 months or 200 gallons. Replace sooner if the refrigerator manual directs you to, the rated capacity is reached, dispenser flow drops noticeably, taste changes, or the filter indicator requests replacement.
A reset light does not renew the cartridge. Reset the indicator only after installing and flushing the correct new filter.
Installation and flushing
Follow the model manual to release the old cartridge, align the new filter with the housing, and lock it using light hand pressure. Follow the owner’s manual for the exact model label on your refrigerator for the compartment location, release method, flushing volume, and reset sequence.
Air may cause temporary sputtering during the first dispensing cycles. Continue only as directed by the manual and inspect the housing for leaks. If water continues to escape, shut off the supply and recheck the cartridge, seals, and housing.
OEM versus compatible filters
Use EDR4RXD1 as the reference part when comparing alternatives. A compatible cartridge should explicitly identify that OEM number and provide independent evidence for its certification claims. A similar-looking connector or a broad statement that it “fits Whirlpool” is not sufficient.
If considering a third-party option, independently confirm compatibility, the certifier listing, seller, and return policy before opening the package.
WRF736SDA models model-specific cross-check
This page applies to the complete model labels WRF736SDAB, WRF736SDAM, WRF736SDAW. In our researched directory, every listed model points to everydrop® Filter 4, part EDR4RXD1.
Other Whirlpool models using EDR4RXD1 in our guide
Different Whirlpool filter families
Whirlpool also uses everydrop® Filter 1 (EDR1RXD1), everydrop® Filter 2 (EDR2RXD1), everydrop® Filter 3 (EDR3RXD1) on other models in our directory. Those cartridges should not be selected for WRF736SDA models without a current manufacturer match.