Maytag model match
Water filter replacement for Maytag MFI2570FEB
The supported refrigerator filter in our guide is everydrop® Filter 4, manufacturer part number EDR4RXD1.
Compatibility entry updated August 29, 2026
Guide match: EDR4RXD1Our research associates Maytag MFI2570FEB with everydrop® Filter 4. Confirm the full model label and current manufacturer result before ordering.
Which water filter fits Maytag MFI2570FEB?
Our compatibility guide associates Maytag refrigerator model MFI2570FEB with everydrop® Filter 4, part EDR4RXD1. This is the identifying number to compare when searching for a replacement refrigerator filter, fridge filter, or compatible cartridge.
Maytag refrigerator filters are shared with other Whirlpool Corporation brands, but compatibility still depends on the complete appliance model and current manufacturer guidance. Do not choose a cartridge based only on refrigerator color, door arrangement, or product photography.
Research record for MFI2570FEB
This entry pairs the complete model number with everydrop® Filter 4 and part EDR4RXD1. It was last reviewed using official Maytag compatibility information on August 29, 2026. Manufacturer confirmation is still required before ordering.
See how every match is researched →Confirm the model before purchasing
Open the refrigerator and locate the permanent model-and-serial label, commonly found on a side wall, ceiling, door frame, or behind a crisper drawer. Confirm that it reads MFI2570FEB, including the final letters and numbers.
- Use the appliance model—not the serial number.
- Compare EDR4RXD1 with the number on the installed cartridge.
- Open the official Maytag confirmation link before ordering.
- Stop if the old and new filter connections do not match.
How often should it be replaced?
The listed replacement interval for everydrop® Filter 4 is every 6 months or 200 gallons. Replace sooner if the refrigerator manual directs you to, the rated capacity is reached, dispenser flow drops noticeably, taste changes, or the filter indicator requests replacement.
A reset light does not renew the cartridge. Reset the indicator only after installing and flushing the correct new filter.
Installation and flushing
Relieve dispenser pressure if needed, follow the housing arrows, and stop if the replacement does not align with light hand pressure. Follow the MFI2570FEB owner’s manual for the exact compartment location, release method, flushing volume, and reset sequence.
Air may cause temporary sputtering during the first dispensing cycles. Continue only as directed by the manual and inspect the housing for leaks. If water continues to escape, shut off the supply and recheck the cartridge, seals, and housing.
OEM versus compatible filters
Use EDR4RXD1 as the reference part when comparing alternatives. A compatible cartridge should explicitly identify that OEM number and provide independent evidence for its certification claims. A similar-looking connector or a broad statement that it “fits Maytag” is not sufficient.
If considering a third-party option, independently confirm compatibility, the certifier listing, seller, and return policy before opening the package.