Maytag model match
Water filter replacement for Maytag MFI2269VE models
This consolidated guide covers MFI2269VEB, MFI2269VEM, MFI2269VEW. Our researched filter match for every model listed is everydrop® Filter 4, manufacturer part EDR4RXD1.
Compatibility entry updated October 18, 2026
Guide match: EDR4RXD1Our directory associates each covered model label with everydrop® Filter 4. Confirm the complete label and current manufacturer result before ordering.
Which water filter fits Maytag MFI2269VE models?
Our compatibility guide associates MFI2269VEB, MFI2269VEM, MFI2269VEW with everydrop® Filter 4, part EDR4RXD1. These exact labels share one researched filter answer, so they are kept together instead of repeating the same guidance across separate pages.
Maytag refrigerator filters are shared with other Whirlpool Corporation brands, but compatibility still depends on the complete appliance model and current manufacturer guidance. Do not choose a cartridge based only on refrigerator color, door arrangement, or product photography.
Exact model numbers covered by this guide
This page covers the complete labels below. Each one is matched with everydrop® Filter 4, part EDR4RXD1, in our current directory.
- MFI2269VEB
- MFI2269VEM
- MFI2269VEW
A shared water-filter match does not mean every appliance component is interchangeable. Use the full label when looking up manuals, parts, or service information.
What is specific to this model family?
Maytag identifies MFI2269VEB and MFI2269VEM as finish variants of its French-door refrigerator with a Beverage Chiller compartment, and its owner information lists EDR4RXD1 as the compatible replacement filter. The black, monochromatic stainless, and white appliance suffixes remain visible for service and cosmetic parts while sharing one Filter 4 answer.
Check the official source: Maytag MFI2269VEM owner information →Research record for MFI2269VE models
This entry keeps MFI2269VEB, MFI2269VEM, MFI2269VEW together because our researched directory assigns the same everydrop® Filter 4 filter, part EDR4RXD1, to every label shown. It was last reviewed using official Maytag compatibility information on October 18, 2026. Manufacturer confirmation is still required before ordering.
See how every match is researched →Confirm the model before purchasing
Open the refrigerator and locate the permanent model-and-serial label, commonly found on a side wall, ceiling, door frame, or behind a crisper drawer. Confirm that the complete label matches one of the covered models: MFI2269VEB, MFI2269VEM, MFI2269VEW.
- Use the appliance model—not the serial number.
- Compare EDR4RXD1 with the number on the installed cartridge.
- Open the official Maytag confirmation link before ordering.
- Stop if the old and new filter connections do not match.
How often should it be replaced?
The listed replacement interval for everydrop® Filter 4 is every 6 months or 200 gallons. Replace sooner if the refrigerator manual directs you to, the rated capacity is reached, dispenser flow drops noticeably, taste changes, or the filter indicator requests replacement.
A reset light does not renew the cartridge. Reset the indicator only after installing and flushing the correct new filter.
Installation and flushing
Relieve dispenser pressure if needed, follow the housing arrows, and stop if the replacement does not align with light hand pressure. Follow the owner’s manual for the exact model label on your refrigerator for the compartment location, release method, flushing volume, and reset sequence.
Air may cause temporary sputtering during the first dispensing cycles. Continue only as directed by the manual and inspect the housing for leaks. If water continues to escape, shut off the supply and recheck the cartridge, seals, and housing.
OEM versus compatible filters
Use EDR4RXD1 as the reference part when comparing alternatives. A compatible cartridge should explicitly identify that OEM number and provide independent evidence for its certification claims. A similar-looking connector or a broad statement that it “fits Maytag” is not sufficient.
If considering a third-party option, independently confirm compatibility, the certifier listing, seller, and return policy before opening the package.
MFI2269VE models model-specific cross-check
This page applies to the complete model labels MFI2269VEB, MFI2269VEM, MFI2269VEW. In our researched directory, every listed model points to everydrop® Filter 4, part EDR4RXD1.
Other Maytag models using EDR4RXD1 in our guide
Different Maytag filter families
Maytag also uses everydrop® Filter 1 (EDR1RXD1), everydrop® Filter 2 (EDR2RXD1) on other models in our directory. Those cartridges should not be selected for MFI2269VE models without a current manufacturer match.