KitchenAid model match
Water filter replacement for KitchenAid KRMF706E models
This consolidated guide covers KRMF706EBS, KRMF706EBS01, KRMF706EBS02, KRMF706ESS, KRMF706ESS01. Our researched filter match for every model listed is everydrop® Filter 2, manufacturer part EDR2RXD1.
Compatibility entry updated October 18, 2026
Guide match: EDR2RXD1Our directory associates each covered model label with everydrop® Filter 2. Confirm the complete label and current manufacturer result before ordering.
Which water filter fits KitchenAid KRMF706E models?
Our compatibility guide associates KRMF706EBS, KRMF706EBS01, KRMF706EBS02, KRMF706ESS, KRMF706ESS01 with everydrop® Filter 2, part EDR2RXD1. These exact labels share one researched filter answer, so they are kept together instead of repeating the same guidance across separate pages.
KitchenAid models in the same product line can use different filter families or revisions. Record every character on the rating label before comparing replacement options. Do not choose a cartridge based only on refrigerator color, door arrangement, or product photography.
Exact model numbers covered by this guide
This page covers the complete labels below. Each one is matched with everydrop® Filter 2, part EDR2RXD1, in our current directory.
- KRMF706EBS
- KRMF706EBS01
- KRMF706EBS02
- KRMF706ESS
- KRMF706ESS01
A shared water-filter match does not mean every appliance component is interchangeable. Use the full label when looking up manuals, parts, or service information.
What is specific to this model family?
KitchenAid documents KRMF706ESS and KRMF706EBS as stainless and black-stainless versions of its 25.8-cubic-foot, five-door refrigerator. Its energy guide groups the ESS and EBS production suffixes with wildcards, while the owner information lists EDR2RXD1 as the replacement water filter. Keep the complete suffix for service records, but use Filter 2 for the water-filter decision.
Check the official source: KitchenAid KRMF706E energy guide →Research record for KRMF706E models
This entry keeps KRMF706EBS, KRMF706EBS01, KRMF706EBS02, KRMF706ESS, KRMF706ESS01 together because our researched directory assigns the same everydrop® Filter 2 filter, part EDR2RXD1, to every label shown. It was last reviewed using official KitchenAid compatibility information on October 18, 2026. Manufacturer confirmation is still required before ordering.
See how every match is researched →Confirm the model before purchasing
Open the refrigerator and locate the permanent model-and-serial label, commonly found on a side wall, ceiling, door frame, or behind a crisper drawer. Confirm that the complete label matches one of the covered models: KRMF706EBS, KRMF706EBS01, KRMF706EBS02, KRMF706ESS, KRMF706ESS01.
- Use the appliance model—not the serial number.
- Compare EDR2RXD1 with the number on the installed cartridge.
- Open the official KitchenAid confirmation link before ordering.
- Stop if the old and new filter connections do not match.
How often should it be replaced?
The listed replacement interval for everydrop® Filter 2 is every 6 months or 200 gallons. Replace sooner if the refrigerator manual directs you to, the rated capacity is reached, dispenser flow drops noticeably, taste changes, or the filter indicator requests replacement.
A reset light does not renew the cartridge. Reset the indicator only after installing and flushing the correct new filter.
Installation and flushing
Open the filter compartment, remove the existing cartridge as directed by the model manual, and seat the replacement without forcing the locking mechanism. Follow the owner’s manual for the exact model label on your refrigerator for the compartment location, release method, flushing volume, and reset sequence.
Air may cause temporary sputtering during the first dispensing cycles. Continue only as directed by the manual and inspect the housing for leaks. If water continues to escape, shut off the supply and recheck the cartridge, seals, and housing.
OEM versus compatible filters
Use EDR2RXD1 as the reference part when comparing alternatives. A compatible cartridge should explicitly identify that OEM number and provide independent evidence for its certification claims. A similar-looking connector or a broad statement that it “fits KitchenAid” is not sufficient.
If considering a third-party option, independently confirm compatibility, the certifier listing, seller, and return policy before opening the package.
KRMF706E models model-specific cross-check
This page applies to the complete model labels KRMF706EBS, KRMF706EBS01, KRMF706EBS02, KRMF706ESS, KRMF706ESS01. In our researched directory, every listed model points to everydrop® Filter 2, part EDR2RXD1.
Other KitchenAid models using EDR2RXD1 in our guide
Different KitchenAid filter families
KitchenAid also uses everydrop® Filter 1 (EDR1RXD1), everydrop® Filter 4 (EDR4RXD1), everydrop® Filter 3 (EDR3RXD1) on other models in our directory. Those cartridges should not be selected for KRMF706E models without a current manufacturer match.